Skocz do zawartości
Zaloguj się, aby obserwować  
strefapc

SMART

Polecane posty

Proszę o ocenę dysków twardych w serwerze.

Poniżej SMART tych dysków:

smartctl -a /dev/sdb
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0-693.21.1.el7.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST1000DM003-1CH162
Serial Number:    S1DGYEAG
LU WWN Device Id: 5 000c50 06d5baeb2
Firmware Version: CC49
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri May 18 11:42:44 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (  584) seconds.
Offline data collection
capabilities:                    (0x73) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 109) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x3085) SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   111   099   006    Pre-fail  Always       -       33530624
  3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       66
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   088   060   030    Pre-fail  Always       -       794327238
  9 Power_On_Hours          0x0032   066   066   000    Old_age   Always       -       30383
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       66
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0 0 0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   054   037   045    Old_age   Always   In_the_past 46 (255 255 46 46 0)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       58
193 Load_Cycle_Count        0x0032   094   094   000    Old_age   Always       -       12656
194 Temperature_Celsius     0x0022   046   063   000    Old_age   Always       -       46 (0 10 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       29673h+27m+30.925s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       201974864630
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       420401387574

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

 

 

 smartctl -a /dev/sda
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0-693.21.1.el7.x86_64] (local b                                     uild)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST1000DM003-1CH162
Serial Number:    S1DGYXNX
LU WWN Device Id: 5 000c50 06d5c515e
Firmware Version: CC49
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri May 18 11:41:44 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (  575) seconds.
Offline data collection
capabilities:                    (0x73) SMART execute Offline immediate.
                                        Auto Offline data collection on/off supp                                     ort.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 103) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x3085) SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_                                     FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   117   099   006    Pre-fail  Always       -                                            121079832
  3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -                                            0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -                                            66
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -                                            0
  7 Seek_Error_Rate         0x000f   086   060   030    Pre-fail  Always       -                                            429891696
  9 Power_On_Hours          0x0032   066   066   000    Old_age   Always       -                                            30450
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -                                            0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -                                            66
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -                                            0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -                                            0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -                                            0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -                                            0 0 0
189 High_Fly_Writes         0x003a   001   001   000    Old_age   Always       -                                            385
190 Airflow_Temperature_Cel 0x0022   054   038   045    Old_age   Always   In_th                                     e_past 46 (228 48 47 46 0)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -                                            0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -                                            60
193 Load_Cycle_Count        0x0032   094   094   000    Old_age   Always       -                                            12873
194 Temperature_Celsius     0x0022   046   062   000    Old_age   Always       -                                            46 (0 10 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -                                            0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -                                            0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -                                            0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -                                            30270h+19m+33.427s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -                                            183773841310
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -                                            374240790646

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

 

 

Udostępnij ten post


Link to postu
Udostępnij na innych stronach

Ale co my mamy oceniać?
Dyski mają za sobą sporo godzin ale są sprawne, nie mają błędów.

Nie wiem czy warto mieć takie w serwerze ale chyba żadna firma nie da Ci nowych dysków :D

Udostępnij ten post


Link to postu
Udostępnij na innych stronach

  1 Raw_Read_Error_Rate     0x000f   117   099   006    Pre-fail  Always       -                                            121079832

7 Seek_Error_Rate         0x000f   086   060   030    Pre-fail  Always       -                                            429891696

 

Czy te parametry są OK?

Udostępnij ten post


Link to postu
Udostępnij na innych stronach

Bądź aktywny! Zaloguj się lub utwórz konto

Tylko zarejestrowani użytkownicy mogą komentować zawartość tej strony

Utwórz konto

Zarejestruj nowe konto, to proste!

Zarejestruj nowe konto

Zaloguj się

Posiadasz własne konto? Użyj go!

Zaloguj się

Zaloguj się, aby obserwować  

×